How to install smart bidet?

bidet installation bidet types mounting smart toilet upgrading toilet

How to add a Smart Toilet to your Regular Toilet

Have you ever discarded the concept of attaching accessories to your toilet because of the difficulties of mounting them? Most people will find it difficult to install smart toilets, at the first glance. But in truth, if you have got all the facilities near your toilets, it is very straightforward. Have you tried to find the solution to the question, "how do you add a bidet to a normal toilet?" and it seems like a challenging task? Do not worry about it.

Knowing how to fit a bidet to your normal toilet might seams difficult. But if you know what the steps and requirements for mounting bidet to toilet are then it will be easy for you. In order to better grasp what you are going to do, you need to decide the kind of bidet you have, the equipment you need, and eventually, the pieces you are going to use. You will need to decide whether your toilet is fit to have a bidet added to it. There are also some simpler general measures to install the three forms of bidets. There are some things you need to watch out for when you pick a bidet. Hopefully, at the end of this reading, you would be more positive than ever when it comes to mounting a bidet.

What are the Bidet Types?

Besides understanding the form of bidet, you should also check for other features such as: retractable nozzles, night light mode, water heater, heated seat, splash guard or included parts. Knowing the other features is critical since they also contribute to the installation process.
Most of the necessary parts for you to effectively mount a bidet are provided in set. But because every bathroom is different and have different pipe system with 1/2" or 3/8" water valve or sometimes even other type. It is good to know what you are water system and select proper adapters that will enable to connect device to water system. Two things, that are almost always required are t-valve and the water supply hose. It is because almost all bidets require them for installation.
The t-valve is a joint used in the pipe fitting to separate or merge the flow of water. It looks like the letter T and allow you to redirect flow of water to bidet. A water supply bidet hose is a hose that can be attached to the water supply lines. With hose attached to the shut-off valves where the main sections of the water supply are installed. This water will flow then to your bidet.

How do I add a bidet to a normal toilet?

The one positive thing about adding bidets to your toilet is that even though you are dealing with different pipe designs, most steps are the same. Switch the primary water valve off. This is the valve from which all the water for your toilet comes, and it can generally be located at the base of the toilet that is connected to the wall. For those who would like to mount SplashLet smart toilet seat or EcoSplash bidet attachment bidets, first detach the toilet seat by using the knobs on either side of the seat. On the opposite, if you want to use hand-held bidets, find a suitable spot to attach the handle.
If you have single water valve you need to split it with T-valve into two directions. The first direction is for the bathroom appliance, and the second is for powering the bidet with water. All you must do is attach it by using a screw. At this time, you should have one free water valve for the bidet. Connect the hose to this valve. Some hoses work easily with only a little bending. If you are using a handheld bidet, what you have got to do is rest the nozzle on the handle and you are done.
For shower toilet seats, mount the device to the top of the toilet bowl on fixing plate. You have finished. However, in the case of the bidet attachment, making sure the nozzle is in the center. If it is bidet attachment sprayer, you must re-attach the toilet seat and make sure that the sprayer attachment beneath it, is not squeezed. Open your water valve and test your bidet. If you see leakage, what you need to do is tighten the connected parts and test one more.

Easy bidet installation

Those are simple steps to link a bidet to a regular toilet. This steps usually can be done with most of the bidet. However, be assured that the steps given here are general guidance. Just note the two key parts like hose water valve type and you are never going to be lost. Now you know how you can improve your hygiene adding bidet function to your toilet. Bidet installation to your current toilet is easy.

Written by
BrookPad Team


Older Post Newer Post


Leave a comment

Please note, comments must be approved before they are published

★ Judge.me Reviews

Let customers speak for us

486 reviews
86%
(417)
14%
(69)
0%
(0)
0%
(0)
0%
(0)
Just perfect!
Value for money WC shower
Toilet with a bit of technology :)
WC Dushing value for cash
Toilet with a little bit of technology:)